ACOM 2000SW Remote antenna switch specifications
   
 
Photographs
FCC Grant of Certification
   
   
 

Parameters
Operating frequency range: 0.1 to 60MHz continuously.
Rated power (continuous): for 0.1 to 30MHz:
5000W @ VSWR1:1
   2500W @ VSWR 2:1
   1600W @ VSWR 3:1

up to 60MHz:
3600W @ VSWR 1:1
   1800W @ VSWR 2:1
   1200W @ VSWR 3:1
Characteristic  impedance: 50 Ohm unbalanced, UHF type SO239A PTFE connectors.
Mismatch VSWR: 
    for 0.1 to 2MHz - better than 1.02:1 
    up to 30MHz - better than 1.08:1 
    up to 60MHz - better than 1.20:1.
Crosstalk isolation: for 0.1 to 2MHz - better than -100dB 
    up to 30MHz - better than -70dB 
    up to 60MHz - better than -66dB.
Operating time: less than 0.15 seconds, including bounces.

Parallel input/output control: 4 - bit BCD input code (positive or inverted - internally selectable), plus RDY output signal.
    * logical “low” input: -1...+1.25V, 1.2kOhm input resistance; 
    * logical “high” input: +7.5...+18V, 1.2kOhm input resistance; 
    * logical “low” output: 0...+1V, 15mA drive, 60mA sink;
    * logical “high” output: +20...+30V, 1.2kOhm output resistance.
Power Supply: +(24...31)V DC, 150mA maximum consumption. i) Size & Weight (operating): 160mm diameter, 105mm height, 1.9kg.
Operating temperature range: -30...+60 degs. Celsius. Protection degree: IP53 (dust and rain).

Functions
Switching capacity: 10 antennas to 1 output. b) Anti - hot switching self - protected.
Ready to transmit output signal.
Unused antennas grounding (all antennas when not powered).
Shipping Size and Weight W178mm x D194mm x H182mm, 2.5kg (4kg when purchased with automatic antenna selector ACOM2000S).
Shipping environments: all types of transportation, including aircraft baggage section.
   
 
Photographs
FCC Grant of Certification
   
 
ACOM International, Inc , 1988-2012 , All rights reserved