SPECIFICATIONS

• Frequency Coverage: All amateur bands 1.8-54MHz; extensions and/or changes on request.

• Power Output: 1000W PEP or continuous carrier, no mode limit.

• Intermodulation Distortion: Better than 35dB below rated output.

• Hum and noise: Better than 40dB below rated output.

• Harmonic Output Suppression:

-1.8-29.7MHz - better than 50dB below rated output;

-50-54MHz - better than 66dB below rated output.

• Input and Output Impedances:

- nominal value: 50 Ohm unbalanced, UHF (SO239) type connectors;

- input circuit: broadband, VSWR less than 1.3:1, 1.8-54MHz continuously (no tunings, no switching);

- bypass path VSWR less than 1.1:1, 1.8-54MHz continuously;

- output matching capability: better than VSWR 3:1 or greater at reduced output levels.

• RF Gain: 12.5dB typically, frequency response less than 1dB (50 to 60W drive power for rated output).

• Primary Power: 170-264V (200, 210, 220, 230 & 240V nominal taps, 100, 110 & 120V taps on request, +10%-15%tol.), 50-60Hz, single phase, 2000VA consumption at rated output.

• Complies with CE safety and EMC requirements, as well as FCC-regulations (6,10 & 12m bands lock provided).

• Size & Weight (operating):

WxDxH: 422x355x182mm, 18kg.

(16.6x14x7.2 inches, 40lbs)

• Operating environments:

- temperature range: 0...+50 degs.Celsius;

- humidity: up to 75% @ +35 degs.Celsius.

- height: up to 3000m above sea level without output deterioration.

                                                  ACOM International Ltd,1999,All rights reserved. Disclaimer